Adjusting The Seat Height On A Type A Electrical Lifter Column With An Adapter - Invacare Storm4 Series Service Manual

SERVICE MANUAL

10.1.2 Adjusting the seat height on a type A electrical lifter column with an adapter

WARNING: Danger of crushing!
The seat is very heavy. Injury hazard to hands and feet!
· Use proper lifting techniques.
WARNING: Danger of crushing!
Injury hazard caused by uncontrolled movement of the mobility device!
· Switch the power supply off (ON/OFF key).
· Engage the drive.
Requirements:
· 4 mm Allen key
· 5 mm Allen key
· T40 torx wrench
· Oblique pliers
· Cable ties
· Torque wrench 5 – 30 Nm (or similar)
· Medium-strength thread-locking fluid, e.g. Loctite 243
Adjusting the seat height manually with an adapter:
·
Remove the seat as described in chapter 8.15.1.1 or 8.15.1.3.
208
®
Invacare - STORM
4 ®
Series