SERVICE MANUAL
10.5.2 Adjusting the seat tilt on a seat with a manual tilt module (from Dec. 2010)
WARNING: Danger of crushing!
The seat and frame are very heavy and can fall down without warning if the seat tilt
adjustment assembly is screwed apart too far. Danger of injury to hands and feet!
· Only change the adjustments when someone is seated in the chair.
· Only change the tilt adjustment to where the distance between the axles is a maximum of
300 mm.
Requirements:
· 19 mm open-end wrench
· Measuring tape
·
Apply the open-end wrench to the hexagon bolt (1) of the tilt adjustment.
·
Turn the tilt adjustment till the desired angle is attained or the distance between the bolts is a
maximum of 300 mm.
226
®
Invacare
- STORM
4 ®
Series