Invacare Storm4 Series Service Manual page 49

®
Invacare - STORM
·
Carefully note the location of the cable and the connection locations of the various plugs. Either
mark each plug and socket, or take a photograph with a digital camera.
·
The pictures show the power module (4), the optional lighting PCB (2) and the optional actuator
modules (1) & (3).
·
Pull the plug (1) out of the power module.
·
Loosen the two nuts (2) with a 8 mm socket spanner.
·
Remove the power module by pulling it backwards from the guides.
·
Replace the power module.
Refitting the power module:
·
Refit the parts in reverse order.
·
Plug all the plugs into their old positions.
·
Select the drive program as described in chapter 8.2.9.
·
If a new software version is available, update the drive program as described in chapter 8.3.
·
Adapt the drive program using the programming software if necessary.
·
To conclude, check all the mobility aid functions.
4 ®
Series SERVICE MANUAL
49