Installing Cables On A Lifter Column Type B; Installing Cables On A Type B Lifter Column - Part 1 - Invacare Storm4 Series Service Manual

®
Invacare - STORM
8.6.2

Installing cables on a lifter column type B

If a type B lifter column was already installed, then you can begin directly with chapter 8.6.2.2.
8.6.2.1

Installing cables on a type B lifter column - part 1

Requirements:
· 4 mm Allen wrench
· Side cutting pliers
· Cable ties
The conduits leading from the battery box to the seat must be installed so that they do not get
crimped, stretched or sheared when raising or lowering the seat.
·
Run the cables from the actuator (2) of the seat angle adjustment to the cable holder (1).
·
Secure the cables with a cable tie.
·
Run the conduits further to the lateral bar.
4 ®
Series
Lifter column type A
electrically adjustable
SERVICE MANUAL
Lifter column type B
electrically adjustable
73