Back Unit With Ergonomic Length Adjustment; Adjusting The Width - Invacare Storm4 Series Service Manual

®
Invacare - STORM
8.17

Back unit with ergonomic length adjustment

8.17.1 Adjusting the width

Note
Please also observe preceding chapter 10.3.1 on "adjusting the seat width".
By default the seat can be adjusted in width between 38 and 53 cm.
Requirements:
· 4 mm Allen key
·
Remove the back cushion.
·
Loosen the three Allen screws (1) but do not remove them completely.
·
Move the plate (2) until the desired width in centimetres can be read off the scale (3).
·
Tighten the three Allen screws.
·
Repeat this work step on the other back plate.
·
Fit a back cushion in the appropriate width.
4 ®
Series SERVICE MANUAL
167