SERVICE MANUAL
4
8.19
Storm
X-plore specific parts
8.19.1 Replacing X-plore trim on the swing arm
Requirements:
· 4 mm Allen key
Note
The procedure is identical for the front swing arm (4) and rear swing arm (5).
Removing the trim:
·
Undo the two Allen screws (3) with a 4 mm Allen key.
·
Remove the Allen screws (3) together with the washers.
·
Press the trim (1) out of the swing arm (4) or (5) from below. When doing so, take care with the
insert nuts (2).
Refitting the trim:
·
Replace the parts in the reverse order.
184
®
Invacare
- STORM
4 ®
Series