Invacare Storm4 Series Service Manual page 151

®
Invacare - STORM
·
Remove the pin retainer (5).
·
Remove the bolt (2) and swing the tilt adjustment assembly (3) forward. If you loosen the lower
bolts also, for example to replace the tilt adjustment, pay attention to the two distance washers
(4).
·
Fold back the entire seat.
·
Keep a firm hold on the seat and the seat support whilst loosening and removing the four torx
screws (1).
·
Lift the seat and the seat support from the vertical column.
Refitting the seat carrier:
·
Refit the parts in reverse order.
·
To conclude, check all the mobility aid functions.
4 ®
Series SERVICE MANUAL
151