Invacare Storm4 Series Service Manual page 144

SERVICE MANUAL
Dismantling the strut:
·
Remove the rear and the centre battery compartment cover as described in chapters 8.1.1 and
8.1.2.
·
Remove the drive wheel as described in chapter 8.10.1.
·
Loosen and remove the nut (1) from the hexagon-socket head bolt (5) on the spring.
·
Remove the spacer (8).
·
Remove the hexagon-socket head bolt (5). In doing so, please pay attention to the washer (7)
and the spacer (6).
·
Loosen the Allen screw (4) with a 4 mm Allen key.
·
Remove the Allen screw (4) together with the cover plate (3).
·
Remove the pin (2). In doing so, please pay attention to the washers and spacers.
·
Remove the strut.
Refitting the strut:
·
Refit the parts in reverse order.
·
To conclude, you should always carry out a trial run to test the vehicle functions.
144
®
Invacare - STORM
4 ®
Series