SERVICE MANUAL
9.6.3
Replacing the curb climber
Requirements:
· 5 mm Allen key
· 13 mm socket spanner
Dismatling the curb climber:
·
Dismantle the legrests.
·
Loosen and remove the two Allen keys (1) including the washers and nuts with a 5 mm Allen
key and a 13 mm socket spanner.
·
Replace the curb climber (3).
Refitting the curb climber:
·
Insert the curb climber (3) in the mounting (5).
·
Fit the two Allen screws (1) with two washers.
·
Fit two nuts (2) with washers from the other side.
·
Tighten the Allen screws and nuts using a 5 mm Allen key and a 13 mm socket spanner.
·
If necessary, fit the positioning shoe (4) to the curb climber as described in chapter 9.6.2.
·
Refit the legrests.
200
®
Invacare
- STORM
4 ®
Series