Invacare Storm4 Series Service Manual page 81

®
Invacare - STORM
·
Loosen both of the nuts (1) with an 8 mm open-end wrench and remove the headlight with the
bracket from the rubber mounting.
·
Loosen both Phillips head screws (2) to remove the headlight from the bracket.
·
Replace the headlight.
Installing headlights:
·
Assemble all parts again in reverse order.
·
Install the cables carefully and secure them with the cable clamps and cable ties. When doing
so, pay attention to chapter 8.6.1.
·
Tighten the screws hand-tight.
·
Check all vehicle functions.
·
Perform an approximate adjustment of the headlight using the ratchet plate as a guide. The
final adjustment can be performed by the user according to the instructions found in the User
Guide.
4 ®
Series SERVICE MANUAL
81