Fitting The Headrest To The Easyadapt Back - Invacare Storm4 Series Service Manual

®
Invacare - STORM
9.4.2

Fitting the headrest to the EasyAdapt back

Requirements:
· 4 mm Allen key
· T30 torx wrench
· 10 mm socket spanner
·
Loosen the three Allen screws (1) using a 4 mm Allen key, but do not remove the screws
completely.
·
Move the back plate (2) outwards.
·
Repeat this on the second back plate.
4 ®
Series SERVICE MANUAL
195