Invacare Storm4 Series Service Manual page 107

®
Invacare - STORM
·
Carefully remove the bolts (5) which connect the shock absorber (4) to the swing arm (1).
·
Undo and remove the two Allen screws (8) with a 6 mm Allen key. Take care with the washers
while doing so.
·
Use a screwdriver to remove the plastic cap (3).
·
Remove the swing arm (1).
·
Undo and remove the Allen screw (4) with a 5 mm Allen key.
·
Remove the washer (5).
·
Remove the sliding bearing (6).
·
Remove the front wheel cradle (2) and replace it. When doing so, take care with the sliding
bearing (7).
Fitting the front wheel cradle:
·
Replace the parts in the reverse order.
4 ®
Series SERVICE MANUAL
107