Invacare Storm4 Series Service Manual page 59

®
Invacare - STORM
·
Loosen the two screws (1) with a 3 mm Allen key and remove the screws including the CLAM
mounting (2).
·
Replace the lighting/actuator module CLAM (3).
Note
When disassembling, take care of small parts such as screws and washers. Put all small parts
down so that they can be reassembled in the right sequence.
Refitting the CLAM:
·
Refit the parts in reverse order.
·
Plug all the plugs into their old positions.
·
To conclude, check all the mobility aid functions.
4 ®
Series SERVICE MANUAL
59