®
Invacare
- STORM
9.3
Fitting the stick holder
Requirements:
· 5 mm Allen key
· Phillips screwdriver size 2
·
Insert the Phillips screw (2) through the borehole of the loop (3).
·
Attach the Phillips screw and the loop to the borehole (1) of the handlebar and tighten the
Phillips screw with a Phillips screwdriver.
·
Loosen and remove the two Allen screws (6) incl. the washers on the lower part of the backrest
hinge (4).
·
Hold the lower mounting (5) with the fastening holes in front of the boreholes of the backrest
hinge.
·
Refit the two Allen screws (6) incl. the washers and tighten the screws.
4 ®
Series
SERVICE MANUAL
193