Invacare Storm4 Series Service Manual page 131

®
Invacare - STORM
Requirements:
· Wooden block to prop up the vehicle
· Allen key 2,5 mm
· Allen key 3 mm, 4 mm, 6 mm
· Small flat-bladed screwdriver
· Circlip pliers
· Loctite 243
· 2 x combination wrench 1 3mm
· Hammer
· Chisel
· Torque wrench
· One new hexagonal dome headed bolt, M8, 20 mm long, 5 mm key size
Additional parts and tools for working on puncture-proof tyres
Tyre lubrication (soap-based)
· 3 screws M8 x 30 mm (for preliminary positioning of the rim during assembly)
Note
Pay attention to small pieces, and the order in which the components are
disassembled. Arrange them in an orderly fashion so they can easily be assembled
again in the right order.
Note
Pay attention to small pieces, and the order in which the components are
disassembled. Arrange them in an orderly fashion so they can easily be assembled
again in the right order.
●
Prop up the wheelchair by lifting it up
on the side that you want to work on
and then placing the wooden block
underneath the battery box on that
side.
· Undo the cable cover caps on the
motors with a 3 mm Allen key.
· Undo the ring terminal ends on the
motors using a 2.5 mm Allen key.
4 ®
Series SERVICE MANUAL
131