Replacing The Complete Front Headlight (Conventional Lighting Unit Until 03/2012) - Invacare Storm4 Series Service Manual

SERVICE MANUAL
8.7.3 Replacing the complete front headlight (conventional lighting unit until
03/2012)
Requirements:
· Phillips screwdriver size 2
· 8 mm spanner
· 4 mm Allen key
· Diagonal pliers
· Cable tie
Removing the front headlight:
·
Remove the rear and centre cover as described in chapters 8.1.1 and 8.1.2.
·
Carefully note the location of the cable and the connection locations of the various plugs. Either
mark each plug and socket, or take a photograph with a digital camera.
·
Loosen the cable leading to the lighting PCB from the front headlight affected (2).
·
Open the cable clamps (1), remove all cable ties and pull the cable out of the mobility aid.
78
®
Invacare - STORM
4 ®
Series