Curb Climber; Fitting The Mounting Of Curb Climber; Replacing The Positioning Shoe - Invacare Storm4 Series Service Manual

®
Invacare - STORM
9.6

Curb climber

9.6.1

Fitting the mounting of curb climber

Requirements:
· 8 mm Allen key
·
Dismantle the legrests.
·
Arrange the curb climber mounting (2) on the front side of the chassis (1).
·
Fit the two Allen screws (3) incl. the washers and tighten the screws with an 8 mm Allen key.
·
Refit the legrests.
9.6.2

Replacing the positioning shoe

·
Dismantle the legrests.
·
Pull the positioning shoe (2) off the curb climber (1) in a forward direction.
·
Slide a new positioning shoe onto the curb climber.
·
Refit the legrests.
4 ®
Series SERVICE MANUAL
199