Disassembly And Replacement - Toshiba e-STUDIO520 Service Manual

16.13 Disassembly and Replacement

[A] Reversing Automatic Document Feeder (RADF) unit
(1) Take off the rear cover
( P.2-47 "[L] Rear cover").
(2) Disconnect 1 connector.
(3) Remove 2 screws. Then take off the RADF
unit by sliding it to the rear side and lifting it
up while the unit is opened.
[B] Cover
[B-1] ADF front cover
(1) Open the jam access cover. Then remove 3
screws to take off the ADF front cover.
March 2005 © TOSHIBA TEC
Screw
e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
16 - 85
Connector
Fig.16-107
Screw
Fig.16-108
Screw ADF front cover
Screw
Fig.16-109
16