Toshiba e-STUDIO520 Service Manual page 58

Symbol Name
S48 CST4-BTM-SNR
4th drawer bottom sensor
S49 CST4-EMP-SNR
4th drawer empty sensor
S50 CST4-TRY-SNR
4th drawer tray-up sensor
S51 CST4-TR-SNR
4th drawer transport sen-
sor
S52 CST4-FEED-SNR
4th drawer feed sensor
S53 DF-TRY-SNR
Original tray sensor
S54 DF-TRY-VR-SNR
Original tray width sensor
S55 DF-RGST-SNR
Original registration sensor
S56 DF-SIZE-SNR1
Original width detection
sensor-1
S57 DF-SIZE-SNR2
Original width detection
sensor-2
S58 DF-SIZE-SNR3
Original width detection
sensor-3
S59 DF-U-LMT-SNR
Lifting tray upper limit
detection sensor
S60 DF-EMP-SNR
Original empty sensor
S61 DF-COV-SNR
Jam access cover sensor
S62 DF-L-LMT-SNR
Lifting tray lower limit
detection sensor
S63 DF-LENG-SNR
Original length detection
sensor
S64 DF-APS-SNR
APS operation sensor
S65 DF-OPN-SNR
RADF opening/closing sen-
sor
S66 DF-SD-REV-SNR
Small original reverse sen-
sor
e-STUDIO520/600/720/850 OUTLINE OF THE MACHINE
Function
Detecting the lowering status of the tray in
the 4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Detecting the presence of the paper in the
4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Detecting the lifting status of the tray in the
4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Detecting the paper transport at the paper
feeding system of the 4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Detecting the paper feeding status of the
4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Detecting the length of the original set on
the original feeding tray
Detecting the width of the original set on
the original feeding tray
Detecting the transporting status of the
original at the registration roller section
Detecting the width of the original
Detecting the width of the original
Detecting the width of the original
Detecting the upper limit position of the
original lifting tray
Detecting the presence of the original set
on the original feeding tray
Detecting the opening/closing status of the
jam access cover
Detecting the lower limit position of the
original lifting tray
Detecting the length of the original
Switching ON/OFF of the APS sensor by
detecting the angle of the RADF
Detecting the opening/closing status of the
RADF
Detecting the transporting status of the
original at the small original reverse section
2 - 36
Remarks P-I
Fig.2-21 30-26
Fig.2-21 7-18
Fig.2-21 7-18
Fig.2-21 7-18
Fig.2-21 7-18
Fig.2-28 93-102
Fig.2-28 93-14
Fig.2-28 91-103
Fig.2-28 91-103
Fig.2-28 91-103
Fig.2-28 91-103
Fig.2-29 81-29
Fig.2-29 81-29
Fig.2-29 81-29
Fig.2-29 82-36
Fig.2-29 82-31
Fig.2-30 86-105
Fig.2-30 89-101
Fig.2-31 84-31
March 2005 © TOSHIBA TEC