Toshiba e-STUDIO520 Service Manual page 424

(4) Remove 1 clip to pull out the shaft.
(5) Remove 1 clip to pull out the shaft, and then
take off the pickup belt.
(6) Remove 1 clip to pull out the shaft, and then
take off the feed roller.
Notes:
1. There are 3 types of clips with different
sizes.
2. Be sure to install the feed roller in the
proper direction.
[D-2] Separation roller
(1) Take off the pickup unit
( P.16-87 "[D-1] Pickup belt / Feed roller").
(2) Remove 2 screws to take off the upper guide
unit.
(3) Remove 2 screws to take off the paper sepa-
rating unit.
e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Pickup belt
Metal bushing
Feed roller
Upper guide unit
Screw
Paper separating unit
16 - 88
Clip ( large )
Clip ( small )
Clip ( middle )
Fig.16-116
Fig.16-117
Fig.16-118
March 2005 © TOSHIBA TEC
Screw