Toshiba e-STUDIO520 Service Manual page 198

[A-6] Drawer detection sensor (S29/S35/S41/S47)
(1) Disconnect 1 connector to take off the
drawer detection sensor.
[A-7] Drawer feed sensor (S34/S40/S46/S52)
(1) Remove 1 screw to take off the drawer feed
sensor with its bracket.
(2) Disconnect 1 connector to take off the
drawer feed sensor.
[A-8] Drawer bottom sensor (S30, S37, S42, S48)
(1) Take off all the feed units.
( P.9-20 "[A] Paper feeder unit / Bypass
feed unit")
(2) Disconnect the connector and take off each
drawer bottom sensor.
Note:
Equipment with the LCF does not have the
3rd and 4th drawer bottom sensors.
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
Drawer detection sensor
Drawer feed sensor
9 - 24
Fig.9-24
Fig.9-25
Drawer
bottom sensor
Fig.9-26
March 2005 © TOSHIBA TEC