Disassembly And Replacement - Toshiba e-STUDIO520 Service Manual

12.6 Disassembly and Replacement

[A] Toner cartridge drive unit
[A-1] Toner cartridge drive unit
(1) Take off the right front inner cover.
( P.2-43 "[B] Front right inner cover")
(2) Disconnect 1 connector.
(3) Loosen 1 screw to take off the bracket.
(4) Pull down the fixing pin and rotate it by 90º.
(5) Pull out the toner cartridge drive unit up to
approx. 30º, and then take it off in the direc-
tion of the arrow.
[A-2] Toner cartridge switch (SW2)
(1) Disconnect 2 connectors, remove 1 screw,
and then take off the toner cartridge switch
with the bracket.
(2) Remove 2 screws to take off the toner car-
tridge switch.
March 2005 © TOSHIBA TEC
Screw
Fig.12-9
Fig.12-10
Top cover
Screw
Toner cartridge detection switch
Fig.12-11
e-STUDIO520/600/720/850 DEVELOPER UNIT
12 - 15
Bracket
Fixing pin
Toner cartridge drive unit
Screw
12