Toshiba e-STUDIO520 Service Manual page 147

(3) Remove the tension spring.
(4) Remove the wire and slant the carriage-2 to
take it out upward.
[J] Lamp inverter board (INV-EXP)
(1) Take off the carriage-1
( P.6-21 "[H] Carriage-1").
(2) Disconnect 2 connectors and remove 2
screws to take off the lamp inverter board.
March 2005 © TOSHIBA TEC
Tension spring
Carriage wire
Fig.6-38
Carriage-2
Fig.6-39
Carriage-1
Fig.6-40
e-STUDIO520/600/720/850 SCANNING SECTION
6 - 23
Tension spring
Carriage wire
Lamp inverter board
6