Toshiba e-STUDIO520 Service Manual page 365

9) Reversing and discharging of 1st original
Both the large original exit and read motors (M39, M36) start to rotate forward. When the leading
edge of the original has reached the read sensor (S69) then been transported a specified distance
by the read motor (M36), the large original exit roller release solenoid (SOL6) turns ON. The large
original exit motor (M39) stops when the large original exit roller release solenoid (SOL6) has turned
ON.
When the leading edge of the original has been transported to the large original exit and reached the
3rd roller, and the large original exit motor (M39) starts to rotate in reverse.
Feeding of 2nd original begins when the trailing edge of the original has passed the 4th roller.(Same
operation as 16.5.1 4))
When the trailing edge of the original has passed the 4th roller and proceeded a specified distance,
the large original exit motor (M39) starts to slow down. When the trailing edge of the original has
been detected by the large original exit sensor (S68) and proceeded a specified distance, it stops
rotating. Then the original is discharged.
Both the read and document feed motors (M36, M37) stop rotating when 2nd original has reached
the scanning waiting position.
March 2005 © TOSHIBA TEC
Fig.16-52
Fig.16-53
Fig.16-54
e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
16 - 29
16