15.7 Disassembly and Replacement
[A]
Exit/Reverse unit
(1)
Take off the left lower cover (= exit cover)
(
P.2-46 "[J] Left lower cover (Exit cover)").
(2)
Open the exit/reverse unit and remove 1
screw.
(3)
Disconnect 1 connector. Then take off the
exit/reverse unit by lifting it up.
[B]
Reverse section cooling fan-1 [M24] / Reverse section cooling fan-2 [M25]
(1)
Take off the left lower cover (= exit cover)
(
P.2-46 "[J] Left lower cover (Exit cover)").
(2)
Disconnect 1 connector, remove 2 screws
and then take off the reverse section cooling
fan-1.
(3)
Disconnect 1 connector, remove 2 screws
and then take off the reverse section cooling
fan-2.
March 2005 © TOSHIBA TEC
Exit/Reverse unit
Fig.15-8
Exit/Reverse unit
Fig.15-9
Reverse section cooling fan-1
Reverse section cooling fan-2
Fig.15-10
e-STUDIO520/600/720/850 EXIT/REVERSE SECTION
15 - 11
15