Paper Feeding System; General Description - Toshiba e-STUDIO520 Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO520:

Table of Contents

PAPER FEEDING SYSTEM

This unit picks up a sheet of paper from the drawer, tandem LCF or bypass tray and transports it to the

transfer position.

The clutch controls the drive from the motor and drives each roller. Also, each sensor detects the trans-

ferring status of the sheet of paper. Fig. 9-1 shows the positioning of each roller and sensor from the

first drawer to the registration roller. Fig. 9-2 shows the positioning of each roller and the sensor of the

Moreover, the composition of the paper feeding unit differs depending on the destination

(machine version). The 4-drawer composition is for NAD, SAD and TWD (e-STUDIO600/720). The

composition of the 2 drawers and tandem LCF is for other destinations.

e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM

E-studio600 E-studio720 E-studio850