Toshiba e-STUDIO520 Service Manual page 196

(3) Remove 1 clip to take off the feed roller.
(4) Remove 1 clip to take off the separation
roller.
[A-2] Drawer empty sensor (S31/S37/ S43/ S49)
(1) Disconnect 1 connector to take off the
drawer empty sensor.
[A-3] Tray-up sensor (S32/S38/S44/S50)
(1) Disconnect 1 connector.
(2) Pull the lever and take off the tray-up sensor
while the pickup roller is lowered.
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
Separation roller
Drawer empty sensor
9 - 22
Feed roller
Fig.9-18
Fig.9-19
Tray-up sensor
Fig.9-20
March 2005 © TOSHIBA TEC