Toshiba e-STUDIO520 Service Manual page 335

[I] Reverse motor [M19]
(1) Take off the reverse section driving unit
( P.15-14 "[H] Reverse section driving unit
/ Reverse motor driving PC board (MOT2-RV
board)").
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse motor.
[J] Reverse roller-1 / Reverse roller-2
(1) Take off the reverse section driving unit
( P.15-14 "[H] Reverse section driving unit
/ Reverse motor driving PC board (MOT2-RV
board)").
(2) Take off the reverse motor
( P.15-15 "[I] Reverse motor [M19]").
(3) Remove 2 E-rings, 2 gears and 2 belts.
(4) Remove 2 E-rings and 2 bearings to take off
the reverse roller-1.
(5) Remove 2 E-rings and 2 bearings to take off
the reverse roller-2.
March 2005 © TOSHIBA TEC
Reverse motor
Fig.15-20
Belt
Gear
Fig.15-21
Reverse roller-2
Bearing
Fig.15-22
e-STUDIO520/600/720/850 EXIT/REVERSE SECTION
15 - 15
Belt
Gear
Reverse roller-1
Bearing
15