Toshiba e-STUDIO520 Service Manual page 73

(5) Disconnect 6 connectors of the high-voltage
transformer.
(6) Remove 1 screw and release 3 locking sup-
ports to take off the high-voltage transformer.
[E] Switching regulator (PS)
(1) Take off the rear cover
( P.2-47 "[L] Rear cover").
(2) Disconnect 1 connector to release the har-
ness from the clamp.
(3) Remove 4 screws and take off the switching
regulator cover.
(4) Disconnect 7 connectors.
(5) Release the hook to take off the switching
regulator.
Note:
When installing or taking off the switching
regulator and its cover, be sure that their har-
nesses are not caught.
March 2005 © TOSHIBA TEC
Locking support
High-voltage transformer
Fig.2-55
Fig.2-56
Switching regurator
Fig.2-57
e-STUDIO520/600/720/850 OUTLINE OF THE MACHINE
2 - 51
Clamp
Switching regurator cover
2