Toshiba e-STUDIO520 Service Manual page 370

5) Start of back side registering
Same operation as 16.5.2. 6)
6) Start of back side feeding
Both the large original exit and read motors (M39, M36) start to rotate forward. After the leading
edge of the original has reached the read sensor (S69) and been transported a specified distance by
the read motor (M36), the large original exit roller release solenoid (SOL6) turns ON. Then the large
original exit motor (M39) stops rotating.
The large original exit motor (M39) starts to rotate in reverse after the original has been transported
to the large original exit and the leading edge of the original has reached the 3rd roller.
The large original exit motor (M39) starts to slow down when the trailing edge of the original has pro-
ceeded a specified distance after passing the 4th roller. After the large original exit sensor (S68) has
detected the trailing edge of the original, the read motor (M36) stops rotating soon and the large
original exit motor (M39) stops rotating when the original has proceeded a specified distance. The
original is nipped by the large original exit roller.
7) Back side registering to set the top side
Same operation as 16.5.2. 6)
e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Fig.16-61
Fig.16-62
16 - 34
March 2005 © TOSHIBA TEC