Toshiba e-STUDIO520 Service Manual page 332

[C] Exit sensor [S22]
(1) Take off the left lower cover (= exit cover)
( P.2-46 "[J] Left lower cover (Exit cover)").
(2) Disconnect 1 connector, remove 1 screw and
then take off the sensor with its bracket.
(3) Release the latch to take off the exit sensor.
[D] Reverse sensor-1 [S23] / Reverse sensor-2 [S24]
(1) Take off the left lower cover (= exit cover)
( P.2-46 "[J] Left lower cover (Exit cover)").
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse sensor-1.
(3) Disconnect 1 connector, remove 1 screw and
then take off the reverse sensor-2.
e-STUDIO520/600/720/850 EXIT/REVERSE SECTION
15 - 12
Exit sensor
Fig.15-11
Exit sensor
Fig.15-12
Reverse sensor-1
Reverse sensor-2
Fig.15-13
March 2005 © TOSHIBA TEC