Note:
When the cleaning web has been installed,
be sure that the web is tightly reeled.
(4)
Remove 2 E-rings, 2 washers, and 2 one-
way bearings. Then take off the web pushing
roller.
Notes:
1. When assembling the unit, be sure that
the one-way bearings are in the correct
directions.
2. Be sure that the web pushing roller rolls
only in the direction of the arrow in the fig-
ure.
e-STUDIO520/600/720/850 FUSER UNIT
Washer
One-way bearing
Mark side
Web pushing roller
14 - 20
Fig.14-19
One-way bearing
Mark side
Washer
Fig.14-20
March 2005 © TOSHIBA TEC