Toshiba e-STUDIO520 Service Manual page 266

(3) Tilt the developer unit and take out the old
developer material by rotating the gear on
the rear side.
(4) Put in the new developer material.
(5) Rotate the gear on the rear side several
times so that the developer material is mixed
evenly.
Note:
When installing the top cover, make sure that
the latches insert completely, the cover does
not catch in the urethane seal and the ure-
thane sheets are overlapped correctly.
e-STUDIO520/600/720/850 DEVELOPER UNIT
Gear
12 - 20
Gear
Fig.12-24
Fig.12-25
Urethane seal ( outside )
Urethane seal
( inside )
Urethane seal
Fig.12-26
March 2005 © TOSHIBA TEC