Toshiba e-STUDIO520 Service Manual page 212

[J] Tandem LCF
(1) Pull out the tandem LCF
(2) Remove 4 screws and take off the tandem
LCF.
[J-1] Standby side mis-stacking sensor (S72)
(1) Remove 1 screw and take off the bracket.
(2) Disconnect 1 connector, release the latch
and take off the Standby side mis-stacking
sensor.
[J-2] Tandem LCF end fence motor (M42)
(1) Remove 1 E-ring and take off 1 bushing.
(2) Disconnect 1 connector, remove 3 screws
and take off the motor with the bracket.
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9 - 38
Tandem LCF
Fig.9-65
Standby side
mis-stacking sensor
Fig.9-66
Tandem LCF
end fence motor
Bushing E-ring
Fig.9-67
March 2005 © TOSHIBA TEC