Toshiba e-STUDIO520 Service Manual page 209

[G] Registration roller unit
(1) Take off the cleaner unit.
(2) Remove 1 screw and take off the fixing
bracket.
(3) Open the right center cover and disconnect 1
connector.
(4) Pull out the registration roller unit toward the
front side while tilting it.
[G-1] Registration roller (rubber)
(1) Remove 2 screws and take off the paper
guide.
(2) Remove 1 screw and take off the plate
spring.
(3) Remove 1 clip and 2 springs.
March 2005 © TOSHIBA TEC
Registration roller unit
Fixing bracket
Fig.9-56
Plate spring
Fig.9-57
Spring
Fig.9-58
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9 - 35
Paper guide
Clip
9