Toshiba e-STUDIO520 Service Manual page 208

(4) Take off the tray-up motor.
Note:
Align the boss of the gear and the hole of the
cover when installing the tray-up motor.
[F] Feed driving unit
(1) Take off the switching regulator.
( P.2-51 "[E] Switching regulator (PS)")
(2) Take off the feed motor.
( P.9-33 "[D] Feed motor (M20)")
(3) Disconnect 1 connector and remove 5
screws to take off the AC input.
(4) Release the harness from the clamp and
remove 6 screws to take off the feed driving
unit.
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
Tray-up motor
Boss
AC inlet
Screw
Screw
Feed drive unit
Screw
Screw
9 - 34
Boss
Fig.9-53
Screw
Connector
Fig.9-54
Screw
Fig.9-55
March 2005 © TOSHIBA TEC