Toshiba e-STUDIO520 Service Manual page 422

[B-2] ADF rear cover
(1) Open the jam access cover. Then remove 4
screws to take off the ADF rear cover.
[B-3] ADF left cover
(1) Remove 2 screws. Then release the hook by
sliding it downward to take off the ADF left
cover.
Note:
The screw on the front side is a stepped
screw.
[B-4] ADF right cover
(1) Take off the ADF front cover and ADF rear
cover ( P.16-85 "[B-1] ADF front cover",
P.16-86 "[B-2] ADF rear cover").
(2) Remove 4 screws to take off the ADF right
cover.
e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
ADF rear cover
ADF left cover
Screw
16 - 86
Fig.16-110
Stepped screw
Fig.16-111
ADF right cover
Fig.16-112
March 2005 © TOSHIBA TEC
Screw