Toshiba e-STUDIO520 Service Manual page 83

A full block in the figure below denotes approx. 10,000 copies.
Type of originals
(6) Transfer/Separation
Transfer:
Transfer is a process of transferring the toner image (visible image) formed on the drum surface
onto the paper.
An electric charge applied by the high voltage power supply flows to the transfer belt from the
power supply roller. Then it flows to the paper and photo conductor. The toner, which has been
developed on the photo conductor, is transferred to this paper with an electric charge.
March 2005 © TOSHIBA TEC
A B C A
A B
Fig.3-14
Drum
Fig.3-15
3 - 7
A
C
Transfer
belt
Paper
e-STUDIO520/600/720/850 COPY PROCESS
Block
3