Operation - Toshiba e-STUDIO520 Service Manual
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO520:
- Service handbook (650 pages) ,
- User functions manual (202 pages) ,
- Network administration manual (124 pages)
Table of Contents
Advertisement
15.4 Operation
The paper from the fuser unit is transported to the reverse path by the exit/reverse gate, which is usu-
ally directed toward the reverse path and switched by the gate solenoid (SOL2) only when the reverse
operation is not carried out.
When the trailing edge of the paper has passed through the fuser transport sensor (S9), the paper
transport speed at the reverse path is switched to a high one and switched back in a specified time after
that. The paper is transported to the exit roller with keeping the high speed and discharged to the out-
side of the equipment. When carrying out a duplex printing, the paper switched back at the reverse path
is transported to the horizontal transport section, which is under the transfer/transport unit and switches
the paper transport speed to a normal one at this time, and it is again transported to the transfer section
and fused there. Then, after the duplex paper has passed through the fuser unit and the exit/reverse
gate has been switched, it is discharged to the outside of the equipment by the exit roller without being
transported to the reverse path.
e-STUDIO520/600/720/850 EXIT/REVERSE SECTION
March 2005 © TOSHIBA TEC
15 - 4
Advertisement
Table of Contents
