Toshiba e-STUDIO520 Service Manual page 358

Feeding of 2nd original begins when the trailing edge of the original has passed the 4th roller.
When the trailing edge of the original has passed the 4th roller then proceeded a specified distance,
the large original exit motor (M39) starts to slow down. After the large original exit sensor (S68) has
detected the trailing edge of the original, the read motor (M36) stops rotating soon and the large
original exit motor (M39) stops rotating when the original has proceeded a specified distance. Then
the original is discharged.
Both the read and document feed motors (M36, 37) stop when 2nd original has reached the scan-
ning waiting section.
e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Fig.16-39
Fig.16-40
Fig.16-41
16 - 22
March 2005 © TOSHIBA TEC