Toshiba e-STUDIO520 Service Manual page 340

3) Read motor (M36) rotating in reverse (seen in front)
Read motor
Read motor rotates
counterclockwise to
transport, scan and
discharge originals.
4) large original exit motor (M39) rotating in reverse (seen in front)
Large original exit motor
Rear
Large original exit roller
Large original exit motor
rotates counterclockwise
to discharge and reverse
originals.
e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Large original
exit roller
Rear
Read roller
One-way pulley
Large original exit motor
Fig.16-5
Small original exit motor
Intermediate
transport roller
Front
Fig.16-6
16 - 4
Large original exit motor
switches to the backside
of an original by rotating
clockwise and registers
that side.
Intermediate transport roller
Front
Small original exit motor
rotates clockwise to trans-
port and discharge originals.
Small original exit roller
Small original
reverse roller
March 2005 © TOSHIBA TEC