6.6.14 Pick/lift motor gearbox removal (bizhub 4020)
1. Remove the left cover. See
2. Remove the rear door and cover. See
3. Remove the power supply. See
4. Remove the power supply shield. See
5. Remove the duplex. See
6. Remove the ACM assembly. See
7. Position the printer so that it sits on its left side.
8. Remove the three screws (A).
9. Disconnect the cable from the pick/lift motor gearbox.
6.6.15 Tray guide removal
Left guide
1. Remove the rear cover. See
2. Remove the left cover. See
bizhub 4020/3320 Service Manual
Left cover
removal.
Rear exit door removal
Power supply
removal.
Power supply shield
Duplex
removal.
ACM assembly
Rear cover
removal.
Left cover
removal.
- 324 -
and
Rear cover
removal.
removal.
removal.