Table of Contents
Advertisement
2-54
Chapter 2 - Digital Station Features
Ring Tone (User Selectable)
The ring tone signal used to notify stations of an incoming call can be changed by each
station user to provide distinctive ringing among a group of stations. Each station user may
select a distinctive ringing tone that is used to ring their station. The system provides
36 different ring patterns that the station users may select from.
Save Number Redial (SNR)
Any number dialed on an outside line can be saved permanently and used at any time. This
number is saved until a new number is stored.
Single Line Telephone Compatibility
STARPLUS
telephone (SLT) instruments. When the Single Line Interface Board (SLIB) is installed in the
Triad 1/2
System, a maximum of 180 single telephones can be supported.
Speakerphone
Both Enhanced and Executive Digital Telephones are equipped with a speakerphone.
However, the speakerphone can be programmed to work in one of three ways:
Normal speakerphone operation.
Disabled for outgoing and incoming CO calls but handsfree on intercom allowed.
Headset operation allowed.
Speed Bins/Chaining
Speed dial bins may be chained together by simply pressing one speed bin, and then another
as required. This is helpful for accessing Long Distance carriers or banking services when
account codes are required.
Speed Dial - Flash
A flash can be programmed within a speed dial number. When this is done, a pause is
automatically inserted before the remaining speed dial digits are sent.
Digital Telephone Systems support industry standard 2500- type (DTMF) single line
Systems up to 48 single line telephones can be supported, while in the
Ring Tone (User Selectable)
Triad 3
Advertisement
Chapters
Table of Contents
