STARPLUS Triad 1 Product Description Manual page 241

Ring Tone
The ringing choices are as follows:
TONE #
00
01
02
03 697/1209
04 697/1336
05 697/1477
06 697/1633
07
08
09
Tone Duration = 50 ms/50 ms
Conditions
Station users may listen to all tones by dialing the 2-digit codes one after another. The
tone that is sounding when the SPEED button is pressed is saved as that station's tone
ringing selection.
A station's tone ringing selection is maintained in a battery protected area of memory.
Therefore, if a system experiences a power failure or a soft or hard restart, the tone
ringing selection is restored.
The tone selected provides TONE ringing normal or muted to the station whenever the
station is commanded to tone ring (i.e., this excludes Camp On tone programming
confirmation tones or other specific tones not considered TONE ringing).
The selected tone is used to notify the station in the following cases:
- Incoming CO Call
- Incoming Intercom Call
- Transferred CO Line
- Recalling CO Line
- Call Back Notification
- Message Wait Call Back
- All Types of Forwarded Calls
- Executive/Secretary calls
- Line Queue Call Back
- LCR Queue Call Back
CO distinctive ringing supersedes station distinctive ringing.
Table 6-4: Ringing Choices
FREQ TONE #
697/770 10 770/1209
697/852 11 770/1336
697/941 12 770/1477
13 770/1633
14
15 852/941
16 852/1209
697/0 17 852/1336
770/852 18 852/1477
770/941 19 852/1633
FREQ TONE #
20
21 941/1209
22 941/1336
23 941/1477
770/0 24 941/1633
25
26 1209/1336
27 1209/1477
28 1209/1633
29 1209/0
Chapter 6 - Digital Station Operation
FREQ TONE #
852/0 30 1336/1477
31 1336/1633
32
33 1477/1633
34
941/0 35
36
6-63
FREQ
1336/0
1477/0
1633/0
Off