Forward Override - STARPLUS Triad 1 Product Description Manual

5-34
Chapter 5 - Electronic Telephone Operation
5) SPEED DIAL -- This button can be programmed to automatically access a speed number
location for one-step operation. PBX and Centrex codes can be programmed into a speed dial
bin and accessed by one button depression.
6) UNASSIGN (Locked Out) -- Specific buttons may be designated as unused or locked out.
When a button is programmed as unused, the button may not be programmed by the station
user using flex button programming procedures.
7) CO LINES -- Specific buttons may be designated as specific outside lines.
Programming a Flexible Button
1. Press the SPEED button twice.
2. Press the assigned button to be programmed (it must be programmed in database as a
multi-function button).
3. Dial the desired code.
Erasing a Flexible Button
1. Press the SPEED button twice.
2. Press the button to be erased.
3. Press the FLASH button. A confirmation tone sounds.
4. Replace handset or press ON/OFF button.

Forward Override

The Forward Override feature allows a user to reach a busy station who is Busy Forward, No
Answer Forward, or All Call Forwarded. This allows the calling station to call a forwarded
station, Executive Override, Monitor, Message Wait, Camp On, or Call Back at that station
rather than forwarding to the busy destination.
Overriding Call Forwarding
Dial [5#] on the dial pad followed by the desired station extension.
Handset Receiver Gain
The Handset Receiver Gain feature allows the user to increase/decrease the handset receiver
gain while on a CO or intercom call.
1. Press the preprogrammed HANDSET RECEIVER GAIN button.
2. Dial a one-digit value from 0 to 9 (0=lowest, 9=highest),
-or-
Press [#] to increase or [
volume settings as they occur.
3. Press the preprogrammed HANDSET RECEIVER GAIN button again to select settings.
] to decrease the gain, one level at a time. The LCD displays the
.
Forward Override