Table of Contents
Advertisement
5-28
Chapter 5 - Electronic Telephone Operation
Terminating a Conference (when initiator is in conference)
Replace handset or push ON/OFF button to OFF position.
Terminating Unsupervised Conference
Press flashing CONF button while on-hook, all parties are dropped.
Default Numbering Plan
Refer to
Dial By Name
The system allows station users to dial extension numbers by entering a name of a person
that has been programmed for that station. The system database allows entry of a name
(alphanumeric) up to 24-characters in length for each station. This programmed name can be
used for dialing-by-name station users and is displayed on LCD displays.
1. Dial the Dial-By-Name code [6
-or-
Press the preprogrammed DIAL-BY-NAME flex button.
2. Dial person's last name on the keypad as shown.
EXAMPLE -- To search for the name BROWN, press [2][7][6][9][6].
When the system finds a unique numeric match to the name being dialed, the call is
placed to the station matching the name.
The intercom call signals the station according to the H-T-P switch setting.
If fewer than 8 digits are dialed, the numeric match is dialed after a 10-second interdigit
time-out occurs, or if a # (pound) is pressed.
Appendix D, "Default Numbering Plan."
1
G-4
H-4
I-4
P-7
R-7
S-7
Q-7
*
] on the dial pad,
.
A-2
D-3
B-2
E-3
C-2
F-3
J-5
M-6
K-5
N-6
L-5
O-6
W-9
T-8
X-9
U-8
Y-9
V-8
Z-9
OPER
#
0
Default Numbering Plan
Advertisement
Chapters
Table of Contents
