Page/Relay Control; Paging; Access Restriction; External - STARPLUS Triad 1 Product Description Manual

Page/Relay Control

Page/Relay Control
On the Triad 1/2/3
for: External Page, Loud Bell Control, CO Line Control, Power Failure Transfer, and Recorded
Announcement uses.

Paging

Access Restriction

Programming on a per-station basis, can deny any station the ability to make any type of
page.

External

There are two External Paging Zones available on the
requires a three-digit dialing code and an externally provided amplifier and paging system.
Each zone can have a relay contact associated to it.

Internal

There are eight internal paging zones available in the
any or all zones or in no zone at all. Stations not assigned to a page group can still make page
announcements, if allowed in station programming. Stations can be assigned to a page
group in order to receive pages but not allowed to make page announcements.

Park Personal

Each digital telephone in the system can place a call into a personal park location and then
later retrieve that call from the originating station. Intercom calls and CO line calls can be
placed into the stations' personal park location. Calls parked in a personal park location are
subject to the system call park recall timer.
A station retrieving a personal parked CO call must have either a direct CO line appearance or
an available loop button to retrieve the parked call.

Pause Timer

When dialing a speed number, a timed pause between digit sending can be placed in the
number. The length of this pause can be programmed in the system database.
Systems, there are four or six relays that may be individually programmed
Only one call can be parked in a Personal Call Park location at one time. When dialing
the Personal Park location and the location is already occupied, the initiating station
receives the previously parked call and the second call is then parked.
Chapter 2 - Digital Station Features
Triad 1/2/3 System. External paging
Triad 1/2/3 System. A station can be in
2-49