Pbx/Centrex Transfer; Paging - STARPLUS Triad 1 Product Description Manual

Paging

Paging
Making a Page Announcement
1. Lift handset or press ON/OFF button.
2. Press preprogrammed PAGE button,
-or-
Dial the two-digit or three-digit paging code.
[700] = All Call - Internal and External
[701- 708] = Internal Zone 1-8
[709] = Internal All Calls
[760] = External All Calls (All Ext Zones)
[761] or [762] = External Zones (1-2)
3. Speak in a normal tone of voice to deliver message.

PBX/Centrex Transfer

While connected to an outside line (PBX/Centrex):
1. Press the FLASH button. Receive transfer dial tone.
2. Dial a PBX/Centrex station number.
3. Hang up to complete the transfer.
Personal Park
Each station in the system can place a call into a personal park location and then later retrieve
that call from the originating station.
While connected to an outside line:
1. Press the TRANS button. The caller is put on Exclusive Hold.
2. Dial the Personal Park location [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button. A dial tone sounds.
Stations off-hook or in DND do not hear the internal page announcement.
When making a zone page or All Call page and the zone is busy, the page initiator
receives ringback tone until the zone becomes available. You then hear a warning
tone and can make the page announcement
When dialing the personal park location and that location is already occupied,
the initiating station receives the previously parked call and the second call is
parked.
Chapter 5 - Electronic Telephone Operation
5-47