Call Forward: Station - STARPLUS Triad 1 Product Description Manual

Call Forward: Station

Network system with call passed across a switch:
By default, no call coverage buttons are assigned.
Conditions
This feature can cover SLT extensions, however an SLT cannot perform the call coverage
function. The SLT extension need not be physically installed, only the SLT card must be
installed.
Direct CO calls have ring and LCD priority over call coverage calls. The call coverage
station must have a direct CO appearance or LOOP button to pick up an external call. If
the call coverage station is in DND, no audible ringing sounds, however visual and LCD
information is presented.
This feature can be programmed on any key station or DSS Console with an available
flexible button. If the DSS with a call coverage button assigned is unplugged or moved,
the station associated with that DSS stops ringing until the DSS is plugged in again.
Camp On or Override drops any internal callers to which a station is talking.
Only one button type (646 or 647) per covered station can be assigned on a keyset.
Call Forward: Station
Call Forward - All Calls
Forwarding All Calls
1. Lift handset or press ON/OFF button.
2. Press the FWD button or dial [640].
3. Dial the All Calls code [6].
4. Press DSS button of desired station,
-or-
Dial the desired extension number where to forward calls, including ACD or UCD, Voice
Mail, Hunt Group pilot numbers and Speed Dial bins for off-net forwarding.
5. Replace handset or press ON/OFF button.
Removing Call Forwarding
1. Lift handset or press ON/OFF button.
2. Press the FWD flex button or dial either [640] or [662]. A confirmation tone sounds and
the FWD LED is extinguished.
XX X X X X XX X C AL LI NG
Y Y Y Y Y Y
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call
Chapter 6 - Digital Station Operation
H H :MM:S S
6-21