Basic Rate Interface Expansion Board (Brib-E) - STARPLUS Triad 1 Product Description Manual

Peripheral Boards

Basic Rate Interface Expansion Board (BRIB-E)

Installs as a daughter-board on the BRIB to provide an additional four Basic Rate Interface
circuits. A BRIB/BRIB-E assembly provides 16 line appearances for the
A maximum of four BRIB/BRIB-E assemblies can be installed into the system.
The BRIB-E uses the U interface of the BRI standard.
Connection to the network is made via RJ45 connectors on the front edge of the board.
The BRIB-E card uses eight time slots when installed.
Figure 11-10: BRIB (BRI Trunk Board)
When ordering BRI lines from the telephone company, specify Capability P as the
ordering code.
National ISDN 1 (NI-1) is supported. No other standards are supported.
Chapter 11 - Triad 3 System Configuration
Triad 3
11-17
system.